Snom VoIP Phone Manuel d'utilisateur télécharger pdf (Page 24)

Basic Functions

a. To map a local SIP line: A user can assign the local lines to

programmable keys by selecting this option and setting the URL of the

local line as argument to that key setting. For example, if a phone has 2

registrations, [email protected] and [email protected], the user has

the option to map two programmable keys to each one of these lines by

selecting 'Line' and setting the respective SIP URL as argument. In this

case, all the calls to a particular line will go to its matching programmable

key, e.g., if [email protected] is mapped at key P2, the LED on that key

will start blinking when there is an incoming call on that line. Similarly, if

the user presses P2 in the idle state with the receiver on hook,

[email protected] will become the active line for that call. This feature

enables the customer to use his different SIP accounts as he would use

different PSTN phone lines. It is also possible to assign different ringtones

to each SIP line in order to make an acoustic differentiation. This can be

done either on the proxy or on the phone’s web interface page Set-

up/Config Line 1-7.

b. To map a SIP URL for call pickup: Selecting this option with a SIP URL

as argument will subscribe to dialog state changes of the phone with that

registration. The LED on that key will show the status of the registration

as idle, talking, or ringing by varying frequencies of blinking. This allows

the user to pick up a ringing call remotely by simply pressing a key. An

example of its usage would be the mapping of the office reception phone

line to the phone of a secretary. If for some reason a ringing phone is not

answered at the reception, the secretary can see its ringing status by the

blinking LED and pick up the call by pressing that programmable key.

This way, no calls go unanswered.

c. Free Key: 'Line' is also the default setting for the programmable keys. If

no argument is set, the keys are treated as free. Outgoing and incoming

calls not bound to any other key go to the first such free key.

Destination

The user can map a SIP URL to a particular programmable key by

setting this option and providing the URL as argument. This option can

be used in the following ways:

a. If the sip line [email protected] is bound to key P3 with this option, all

calls coming to the phone from this number will go to P3.

b. If P3 is pressed during the idle state, [email protected] will be dialed,

as it is set as destination for this key.

c. In the ringing state, if the call comes from any line other than

[email protected], pressing P3 will transfer the incoming call to

[email protected].

Intercom

This option is similar to 'Destination' with the exception that pressing

the key bound to 'Intercom' enables the intercom mode and the phone

will be directly connected to the set snom phone if authentication is set

up properly. This feature is useful in an office environment as a quick

access key to connect to the operator or the secretary.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 70 71

Commentaires sur ces manuels

Pas de commentaire

Snom VoIP Phone Manuel d'utilisateur Page 24

Commentaires sur ces manuels